Cabinet options

Made-to-measure panelsPanels cut to size in the colour of your IKEA cabinet, for your own design

Need a separate panel next to your fronts? You order it in the same material as your fronts or your cabinet. You set the dimensions, we make the panel to measure for you.

With separate panels you finish your kitchen, cabinet or furniture entirely to your own design. Use them as a filler in your kitchen, as a surround for your wall cabinets, or for a made-to-measure solution you come up with yourself. For a filler next to your PAX and a surround for your BESTÅ, the configurator already has a solution: see filler panel and BESTÅ surround.

Whether you want to finish your kitchen, build a bench next to your PAX wardrobe or have something else entirely in mind: a separate panel leaves every option open.

How to order a separate panel Build it yourself

How to order a separate panel

You order a separate panel in the configurator for your series. For PAX, BESTÅ and PLATSA you'll find them under Extra panels; for METOD you choose the type Extra panel. Enter the length, width and quantity, and choose which colour of your design. You immediately see a drawing in the right proportions, and which sides we edge-band.

Build it yourself

With separate panels you really get to work yourself. Think of a small table that fits between or next to your PAX, PLATSA or BESTÅ cabinet, a bench next to your wall of cabinets, or a kitchen island with an open shelving unit at the end. Because the panels are the same material as your cabinet, it looks as if it always belonged there.

It does ask a bit more of you. We cut the panels to size and edge-band them; the design, the joints and the assembly are up to you. With some creativity and skill, you make something no catalogue has.

Good to know

Exact size

You get a separate panel at exactly the size you enter, with no clearance: from 200 to 2790 mm long and from 70 to 1300 mm wide. If your top or wall is larger, make it from two panels and choose where the seam goes.

Edge banding

We edge-band a separate panel all round, on all four sides. If the shortest side is narrower than 97 mm, we band only the two long sides: the machine can't band an edge that narrow. You see which of the two applies in the configurator before you add the panel.

No holes or fittings

We supply a separate panel without drilled holes and without fixings. Drilling, joining and fixing it in place is up to you, with fittings that suit your design.

The grain follows the length

If your material has a wood grain, it runs along the size you enter as Length. Want the grain along the long side of a tabletop? Then enter that long size as the length.

Same colour and thickness

You choose a separate panel in one of your design's colours. For PAX that's the colour of your doors or your second colour, for BESTÅ and PLATSA that of your fronts or your cabinet, for METOD the material of your fronts. That way the panel has the same colour and thickness as the rest.

Mind the sag

A panel with a long free span sags, especially with weight on it. Using it as a tabletop or bench? Support it with a batten or a panel placed crosswise, or keep the span short.